You would have to replace 0x400A0000 by 0x40082000 in the hash and cmp commands. Hello All: Im using Petalinux 2018.3 and configured u-boot to fetch FIT file 'image.ub' using the u-boots dhcp command: DHCP client bound to address 192.168.2.128 (3761 ms) Using ethernetff0e0000 device. I used two files for the purpose of the example, but you could just append to image.bin and transfer one single file. Hash sha256 0x40080000 0x2000 *0x400A0000Īnd a new binary file containing the new hash would of course have to be created as well: sha256sum -b image.bin | xxd -r -p > The correct u-boot command to use for computing the hash would be: In real life, this would be more practical to transfer an image with a fixed, maximum length, for example padded with zeroes, so that a u-boot script responsible for validating the transferred image would use a fixed length, say 8 KiB, that is 0x2000 bytes. U-Boot documentation, like the U-Boot itself, is very much a work in progress that is especially true as we work to integrate our many scattered documents into a coherent whole. uboot> bootm 0x1000000 0x2000000 0x3000000 Step 9-11 load all the kernel related files to the DDR-RAM through tftp and bootm will start the boot. uboot> tftpboot 0x3000000 /tftpboot/system.dtb 12. The outcome would have been in the case of an incorrect transfer: echo $? This is the top level of the U-Boot’s documentation tree. uboot> tftpboot 0x1000000 /tftpboot/image.ub 10. In the case image.bin and/or would have been improperly transferred, the chances that the computed sha256 would match the transferred one are extremely unlikely - using SHA-512 would make this even more unlikely. # 0x40090000: address where will be transfrered Wait a couple of minutes (first boot is always slightly slower) and enjoy your freshly reflashed Yún. OpenWrt-Yun will now start its boot process. On your u-boot system (using the memory layout available on my Alwinner H5 system here): # 0x40080000: address where image.bin will be transfered After completing the above steps, if the U-Boot prompt appears, type the following command in the Serial monitor, followed by Enter : 1 bootm 0x9fea0000. # create a file containing the hash in binary On a Linux TFTP server: # create an image for the purpose of the exampleģ6949f85f1bff0d5d1dd5fcfdfd725e919b0ee64be24f7f3ccfb53908fd09550 *image.bin Real user, and synthetic monitoring of web applications from outside the firewall.Using the TFTP protocol does not ensure that the integrity of the transferred data will be preserved - see section Security Consideration in this article.Īssuming your u-boot has the hash command available, or that you can re-compile it with CONFIG_CMD_HASH=y, you could use an SHA-256 hash for verifying that your image was properly transferred: Real-time live tailing, searching, and troubleshooting for cloud applications and environments. Monitoring and visualization of machine data from applications and infrastructure inside the firewall, extending the SolarWinds® Orion® platform. Infrastructure and application performance monitoring for commercial off-the-shelf and SaaS applications built on the SolarWinds® Orion® platform.įast and powerful hosted aggregation, analytics and visualization of terabytes of machine data across hybrid applications, cloud applications, and infrastructure. SaaS-based infrastructure and application performance monitoring, tracing, and custom metrics for hybrid and cloud-custom applications. Deliver unified and comprehensive visibility for cloud-native, custom web applications to help ensure optimal service levels and user satisfaction with key business services
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |